TOWA - APN Series Label Applicators - For Square and Rectangle Labels

A Mech-Sensor combines with a sensor that automatically detects labels of different strokes to eliminate the need for manual alignment when you load labels.

For pre-printed general roll labels. No need for punched or split labels or a separator.

Supports use of label sizes from 20mm x 18mm up to 100mm x 60mm

Key Points:

  • No feeding holes, slits or eye-marks (black marks) required on release liner
  • No mechanical adjustment is needed in different sizes of labels
  • Different sizes of labels within the specifications can be dispensed and applied by the specific applicator
  • 2-3mm gap between each label is required
  • Max 100mm width label can be dispensed and applied
  • The Mech-Sensor detects a height of label from 18mm up to 60mm without any adjustment
  • You can use labels in roll, printed barcode labels and rewound rolls

apn-specs.jpgTOWA_Mech_Sensor_Concept.jpg

 

APNSeries.jpg

MODEL

LABEL GAP (mm)

LABEL SIZE (mm)

MAX OUTSIDE DIAMETER (mm)

STROKE

WIDTH

 APN-30

2-3 18-60  20-30  100

APN-60

25-60

APN-100

50-100
Results 1 - 3 of 3

APN Series

TOWA APN-100

Hand-held label applicator for any...

Product details

TOWA APN-30

Hand-held label applicator for any...

Product details

TOWA APN-60

Hand-held label applicator for any...

Product details

×

Contact Us Today!

Call (08) 9446 2445

Or Click Here